Solving common pool water problems

The cleanliness of your pool is very important, especially in peak times of using it, for example, in summer; but sometimes it may be difficult to spot the solution to your swimming pool’s problem, making cleaning it an obstacle.

If:

Your pool’s water is green, cloudy and/or has slippery sides, the cause may be algae.
To solve this problem, you should shock dose the pool with chlorine and add a chemical that is tough on algae.

Your pool has too much chlorine, you may have overdosed the pool.
A way of solving this problem would be to buy a chlorine reducer or allow time to take its course for a natural reducing of the chlorine.

Your PH levels are hard to control, your pool’s alkalinity might be low.
To solve this problem, you should seek out advice on how to increase the levels of alkalinity in your pool.

Your pool’s water is cloudy, your chemical control could be poor, or the pool’s filtration could be inadequate.
To sort this problem, you should clean the cartridge, check the PH and chlorine levels of the pool, and if necessary, adjust them. If the problem returns, purchase a pool clarifier to extinguish the small particles.

Your pool has rough sides and edges, scale could have formed due to the elevated levels of calcium in the water.
Make sure that the PH levels are where they should be first, and use a pool scale inhibitor to stop calcium advancing out of the water.

There isn’t a colour change on the test strip’s dip test, the cause could be too much chlorine in the water, (over 15ppm chlorine) leading to the bleaching of the indicator pads.
The fault could be from the test strips, so make sure they are within date and then wait for for the chlorine levels to drop and try the test again.

Your pool is beginning to foam, this is because the cleaning products that have been used are incorrect and are not compatible with the water in the pool or because of the excessive use of algaecide.
The prevent this problem from happening, deter from using household cleaning products for your pool.

For more information about swimming pool chemicals, please visit our website.

The improvement of cleaning products

Cleaning products have improved gradually over the years, but just when did we start using them in our day to day lives?

The cleaning products that we use in the modern day are not only safe to use are human life, but they’re also safe to use in the natural environment, not causing harmful danger to the area in which they’re used. Chemical research has allowed us to develop the bleaches, detergents and cleaners that are used every day in a range of jobs worldwide.

Use of products in the modern day

There’s a fantastic range of cleaning products to be had on the market today; a number of companies all offer their products, recommending each for its own individual attributes and special formula. Soaps and cleaners are commonly used in kitchens, bathrooms and they’re also used in public companies to ensure that health and safety regulations are met. Without these chemicals available, it’d be more common for humans to catch a range of disease through lack of hygiene.

It’s the advice of millions of medical advisers that you should wash your hands as frequently as possible, all in the aim of preventing flues, colds and other common diseases that can be passed through human contact. If you were to visit a hospital or doctors surgery, it’s not uncommon to see hand soap containers attached to the wall. They’re around for the convenience of healthcare professionals to avoid spreading germs around their establishment.

As with the development of more effective cleaning products, they’ve also reached a point where they’re much safer to use, having less of an impact on the environment than they previously did. Cold water is often used in cleaning process now, as it helps the green movement through avoiding the use of heated water.

Getting your hands on these cleaning products has never been more widely available, as with the invention of the Internet you can shop for these items from the comfort of your sitting room. Cleaning organisations and services offer the sale of these products and delivery is often fast and affordable, saving time for all and boosting business through online purchases.

So, how has cleaning improved through the years?

If you were to look at the history of cleaning, the first cleaning product was something we use every single day: water! Back in an age where chemicals weren’t around, humans would’ve had to rely on using water to clean the areas around them. The first notable improvement on the cleaning industry was seen in the mid 1900’s, where as soap products would begin to make their way to the masses. Over the next fifty years, soaps and detergents would go through a rigorous process of constant development, where they would expand to the likes of dishwasher soap, liquid soaps, concentrated powder, gels, refills and cold water detergents, amongst others.

We use cleaning products for reasons known to us all, yet the development of cleaning items for personal cleanliness and health have been around for a long, long time. The common used of person cleaning items came about in the Middle Ages, where cleaning products made up of variable items would be used to clean ourselves. For example, things like animal or plant fats, ashes and oils were all used in a mixture for the cleaning of human skin.

It wasn’t until the mid 1800’s when soap chemistry would be available to the masses, after it was once considered a luxury item. The chemistry of soap was studied and improved, making it a common item for all to use. Following WWII, detergents had a major popularity increase and became the weapon of choice for housewives everywhere. The importance of soap, both general and hand are blatant to all in the modern day, as the public is often reminded of the dangers being unclean offers.

Living in modern times, it’s arguable that this is the best time period to be in to enjoy the use of safe and healthy cleaning product. Naturally, research continues in the hope of bringing further improvements to the market, potentially finding new uses for cleaning products everywhere.

For more about cleaning products, please visit our website.

Top five tips on how to care for your swimming pool

Check out our swimming pool tips here!

With the weather seemingly getting hotter and sunshine greeting us on an almost daily basis, we thought it was a good time to write up some top tips for pool users everywhere! In this blog, we’ll discuss the ins and outs of cleaning your swimming pool, with the maintenance and pool care tips giving you an understanding into just what your swimming pool needs to stay healthy. For a full list of fantastic swimming pool chemicals, please visit our website!

The circulation of your swimming pool
In order to get the maximum level of effectiveness for the pool sanitizer, pool water MUST be circulated. The more often that water is in motion; it’s a lot harder for bacteria to take hold of the water, along with algae. Debris that exists in the water can be captured by the filter that moves the water around the swimming pool. Also, it should be noted that the best time to circulate water is throughout the day, for around 10 hours or so.

The filtration process of your swimming pool
The filter of your swimming pool is actually one of the most vital pieces of equipment in your inventory. The process of the filter is to remove elements of visible debris, with pieces of microscopic matter also being filtered by the swimming pool. Usually, a filter should be backwashed, where this is the process of removing materials that get trapped in or on the filter material. You can find chemicals to clean out the filters on our website.

How can you care for your swimming pool?
How can you care for your swimming pool?

The cleaning of your swimming pool
You should know that, depending on your swimming pool, some models have areas that hold little or no circulation at all. In these parts of the swimming pool, bacteria and algae can begin to be produced, which is bad for the health of your pool. It’s a good idea to brush and vacuum the walls and floors of this area every week in order to remove the amounts of debris that is missed by the filter. Brushing the different areas of the swimming pool is a definite, especially if you have an automatic pool cleaner or even have a weekly cleaning service for your pool.

Testing out your swimming pool
Swimming pools have a number of different characteristics, which will change depending on the manufacturer. These characteristic should be measured and adjusted on a regular basis. The most important elements of the swimming pool are the pH and the levels of active sanitizer that exists in the water. In order to test these two different factors, checking at regular intervals that they’re at correct levels; overtime you’ll understand how to various different factors affect the elements of the water. Testing your pool water a number of two or three times per week will help you learn the ins and outs of your pool.

The chemistry behind your swimming pool
The final step in the maintenance of your swimming pool regime takes a look into the chemistry of your pool, ensuring that you apply the right products to your water. Doing this will help you to:

  • Providing a swimming environment safe for all
  • Balancing the water in order to protect the equipment and surfaces around the pool.

Finally, you should remember that this will supply you with a fantastic swimming pool which has a perfect finish.

Top five tips on how to care for your swimming pool | Case Chemicals

Ever wondered how to take proper care of your #swimmingpool? We explain this and more in our latest #blog! http://goo.gl/ZjDAo1

Check out our swimming pool tips here! With the weather seemingly getting hotter and sunshine greeting us on an almost daily basis, we thought it was a good time to write up some top tips for pool users everywhere! In this blog, we’ll discuss the ins and outs of cleaning your swimming pool, …

How to: Checking windscreen wash | Case Chemicals

How do you top up your #windscreen  washer in your car? We can help! http://goo.gl/lm6lPO

Step by step process: Lift your car bonnet; Identify the location of the washer bottle (be aware that this will change depending on vehicle); Refer to your vehicles handbook for any questions you may have; Remove the top from the washer bottle; Top up the washer bottle with water (you can add …

Hotel Germs, where to find and clean | Case Chemicals

Hotel Germs, places often forgot about & the chemical products you need to do the job properly. 

Hotel rooms are meant to be the one escape from home without all the worries of things such as mess, clutter, cleanliness however, hotel rooms can actually house unexpected germs, including bacteria and viruses which are not welcome guests. Due to the ever high rates of cleanliness hotels must …

Hotel Germs, where to find and clean | Case Chemicals

Hotel Germs, places often forgot about & the chemical products you need to do the job properly. 

Hotel rooms are meant to be the one escape from home without all the worries of things such as mess, clutter, cleanliness however, hotel rooms can actually house unexpected germs, including bacteria and viruses which are not welcome guests. Due to the ever high rates of cleanliness hotels must …